Passing exam with FCSS_LED_AR-7.6 latest training materials

Refer to the exhibit.

Which shows the WTP profile configuration.
The AP profile is assigned to two FAP-231F APs that are installed in an open plan area.
The first AP has 32 clients associated with the 5 GHz radios and 22 clients associated with the
2.4 GHz radio. The second AP has 12 clients associated with the 5 GHz radios and 20 clients associated with the 2.4 GHz radio.
A dual-band-capable client enters the area near the first AP and the first AP measures the new client at - 33 dBm signal strength. The second AP measures the new client at -43 dBm signal strength.
If the new client attempts to conned to the student 01 wireless network, which AP radio will the client be associated with?

• A. The second AP 2.4 GHz interface is preferred over 5 GHz for better speed and lower interference.
• B. The first AP 2.4 GHz interface provides a stronger signal, which clients often prioritize.
• C. The second AP 5 GHz interface has fewer clients, which ensures better performance despite the weaker signal.
• D. The first AP 5 GHz interface because it has a stronger signal.

Refer to the exhibit.

The exhibit shows an LDAP server configuration with the Username setting has been expanded to display its full content.
The administrator has configured the LDAP settings on FortiGate and is troubleshooting for authentication issues.
As part of the troubleshooting steps, the administrator runs the command dsquery user -samid student on the Windows Active Directory (AD) server with an IP address 10.0.1.10 and received the output CN=student, CN=Users, DC=trainingAD, DC=training, DC=lab.
Based on the dsquery output, which LDAP setting on FortiGate is misconfigured?

• A. The Distinguished N setting is incorrectly configured, causing issues with user authentication.
• B. Sever IP/Name is misconfigured so FortiGate can't reach the LDAP server.
• C. The Common Name Identifier is incorrectly set, causing authentication failures.
• D. The Bind Type is incorrectly configured, preventing FortiGate from connecting to the LDAP server.

You are configuring a new wireless network for your organization. The network requires users to authenticate through a RADIUS server for secure access. Which two security modes should you select when creating the SSID to ensure compatibility with the RADIUS server? (Choose two.)

• A. WPA3-Enterprise
• B. WPA/WPA2 Mixed Mode
• C. WPA-Personal
• D. WPA2-Enterprise
• E. WEP

Refer to the exhibit.


Review the exhibits to analyze the network topology, SSID settings, and firewall policies.
FortiGate is configured to use an external captive portal for authentication to grant access to a wireless network. During testing, it was found that users attempting to connect to the SSID cannot access the captive portal login page.
What configuration change should be made to resolve this issue to allow users to access the captive portal?

• A. Disable HTTPS redirection for the captive portal authentication page.
• B. Exclude FortiAuthenticator and Windows AD address objects from filtering.
• C. A firewall policy allowing Guest SSID traffic to reach FortiAuthenticator and Windows AD.
• D. Change the SSID security mode to WPA2-Enterprise for authentication.

APs have been manually configured to connect to FortiGate over an IPsec network, and FortiGate successfully detects and authorizes them. However, the APs remain unmanaged because FortiGate is unable to establish a CAPWAP tunnel with them. What configuration change can resolve this issue and enable FortiGate to establish the CAPWAP tunnel over the IPsec connection?

• A. Decrease the CAPWAP tunnel MTU size for APs to prevent fragmentation.
• B. Configure a static route on FortiGate to reach the APs over the IPsec tunnel.
• C. Upgrade the FortiAP firmware image to ensure compatibility with the FortiOS version.
• D. Assign a custom AP profile for the remote APs with the set mpls-connection option enabled.