DES-6322 Revolutionary Guide To Exam EMC Dumps
DES-6322 Free Study Guide! with New Update 106 Exam Questions
DELL DES-6322 Exam Cover Topics
The exam covers the following topics:
- Virtual Machines and Virtual SAN
- VxRail Netformix Manager Netformix charts and reports
- Installation of vSphere Client, vCenter Server, and ESXi using Auto Deploy
- Deployment and Configuration of VxRail components
TrainingQuiz helps you to prepare for your potential certification & career development by providing the latest DELL DES-6322 exam dumps for self-practice. You will get exam questions & answers here in the form of PDF files so that you can perform well in your assigned certification exam with ease. Foundation & Technical skills test your technical knowledge in your certification subject. Success in certification depends on your accuracy and performance.
NEW QUESTION 49
What are the requirements for a customer-supplied VDS in a VxRail deployment?
- A. 2 or 4 uplinks
Port groups for Discovery, Management vCenter Server, vMotion, and vSAN - B. 4 or 8 uplinks
Port groups for Discovery, Management, vCenter Server, vMotion, and vSAN - C. 2 or 4 uplinks
Port groups for Discovery, Management, vMotion, and vSAN only - D. 4 or 8 uplinks
Port groups for Discovery, Management, vMotion, and vSAN only
Answer: A
Explanation:
NEW QUESTION 50
An implementation engineer is working with a customer to prepare an external vCenter Server for a new VxRail deployment with the VxRail-deployed VDS. What vCenter objects must exist for a successful VxRail deployment?
- A. Datacenter and VxRail Management user only
- B. Datacenter and Cluster only
- C. Cluster and VxRail Management user only
- D. Datacenter Cluster, and VxRail Management user
Answer: A
NEW QUESTION 51
Which requirement must be met when expanding a 3-node VxRail G560F cluster with a fourth G Series node in the same chassis?
- A. New node must be at the same VxRail version as existing nodes
- B. Node hardware must be identical to the other three nodes
- C. Node requires only the same drive configuration
- D. PCIe network card must be added to all nodes
Answer: B
Explanation:
NEW QUESTION 52
A VxRail implementation engineer is validating the network environment with NVT. The proposed switch configuration is shown in the exhibit. The ToR Switch information file is available.
Use the VxRail simulator to set up NVT for switch validation. Import the switch Information and tag the ports based on the exhibit.
Answer:
Explanation:
Send your suggestions for this question.
NEW QUESTION 53
An implementation engineer places a VxRail node into maintenance mode using the Ensure accessibility setting What is the engineer likely planning to do?
- A. Extensive maintenance
- B. Temporary maintenance
- C. Shutdown of an entire cluster
- D. Permanent removal of host from cluster
Answer: B
Explanation:
NEW QUESTION 54
What is the basis used for VMware vSAN licensing?
- A. TB capacity per node
- B. Per CPU socket
- C. TB capacity per cluster
- D. Per disk group
Answer: B
NEW QUESTION 55
Which command can be used from the VxRail Manager VM to restart the loudmouth daemon?
- A. systemctl restart vmware-loudmouth
- B. systemctl restart loudmouth
- C. /etc/init.d/loudmouth restart
- D. /usr/lib/vmware/loudmouth/bin/loudmouthd restart
Answer: A
NEW QUESTION 56
A VxRail solution will be deployed with the embedded vCenter and an external DNS At a minimum, for which components must DNS records be created?
- A. vCenter Server, ESXi hosts, and VxRail Manager
- B. vCenter Server Platform Services Controller, and VxRail Manager
- C. ESXi Hosts, VxRail Manager and iDRAC
- D. vCenter Server Platform Services Controller, and iDRAC
Answer: B
NEW QUESTION 57
Match each VxRail data protection solution with its functionality.
Answer:
Explanation:
NEW QUESTION 58
An implementation engineer needs to validate the VxRail network configuration. Where can they obtain the NVT for VxRail?
- A. Dell Technologies Information Hub
- B. Dell Technologies Central
- C. Dell VxRail Expert Channel
- D. Dell VxRail Fast Pass
Answer: B
NEW QUESTION 59
After implementation, the implementation engineer observes errors from both VxRail Manager and vCenter Server.
Dell EMC support has requested a log bundle containing only the required log files.
Using the simulator, create and download a log bundle for Dell EMC support.
When you have finished, continue to the next question.
Answer:
Explanation:
NEW QUESTION 60
A systems engineer is deploying a VxRail cluster. They want to ensure that configuration issues can be avoided when expanding this cluster.
Which actions need to be performed?
- A. Validate that the latest updates and patches are installed in the system Validate that no pending and unfinished jobs are running on the servers
- B. Verify the configuration settings initially captured in PEQValidate the storage environment
- C. Validate that no pending and unfinished jobs are running on the servers Verify that the server and storage components are working properly
- D. Verify VxRail nodes are racked and connected to the ToR switches
Validate the network environment
Answer: D
Explanation:
NEW QUESTION 61
Which VxRail model can only be installed with static rack rails?
- A. D Series
- B. S Series
- C. P Series
- D. G Series
Answer: C
Explanation:
NEW QUESTION 62
An implementation engineer is expanding an existing VxRail S Series cluster with an additional node. The version of the node is not at the current cluster level but is compatible.
What procedure would result in the quickest node addition?
- A. Compute node expansion
- B. RASR Factory Image Upgrade
- C. Factory Reset
- D. VxRail Node Imaging Management
Answer: B
NEW QUESTION 63
An implementation engineer is reviewing the customer requirements for a VxRail implementation The customer has specified noncontiguous hostnames and IP addresses What option should the engineer select in the VxRail Deployment Wizard to input the hostnames and IP addresses?
- A. Advanced
- B. Autofill - with the correct incrementor
- C. Autofill - with the correct offset
- D. Custom
Answer: C
NEW QUESTION 64
A planned VxRail Stretched Cluster will have four All-Flash nodes at each site What is the recommended storage policy to ensure cross-site and local protection, using storage as efficiently as possible?
- A. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-1 (Mirroring)
- B. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - no data redundancy
- C. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding)
- D. Site disaster tolerance - None - keep data on Preferred (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding)
Answer: D
NEW QUESTION 65
A 2-node VxRail duster Is being deployed. Due to a preparation mistake, the host section fe missing. Use the VxRail simulator to fully deploy the cluster using the JSON file.
Node Names:
vcluster-esxO 15-vrack
vcluster-esxO 16-vrack
Starting IP
Address: 192.168.10.15
Rack Name: Virtual Rack
Rack Position: 15-16
Passwords: Passwordl23
!
ESXI Management
User: esxmgmt
When you have finished, continue to the next question.
Answer:
Explanation:
Send your suggestions for this question.
NEW QUESTION 66
When preparing to generate an As-Built Configuration Report, it is determined that the VxRail Configuration JSON file was not saved from the Deployment Wizard. What actions must be taken to retrieve the JSON file?
- A. Log in to vCenter with the vSphere Client with the vCenter Server Management user Go to Monitor > VxRail > Last Configuration Data Sent Use the Download option
- B. SSH to the VxRail Manager VM with the mystic user
SU to root
Go to the /opt/VxRail/config directory
SCP the initial-config json file to a local location - C. Log in to vCenter with the vSphere Client with the vCenter Administration user Go to Configure > VxRail > System Use the Product Documentation option
- D. Open an FTP connection to the VxRail Manager VM with the mystic user Go to the /var/lib/vmware-marvin directory GET the config-initial json file
Answer: D
NEW QUESTION 67
When preparing to generate an As-Built Configuration Report, it is determined that the VxRail Configuration JSON file was not saved from the Deployment Wizard. What actions must be taken to retrieve the JSON file?
- A. Log in to vCenter with the vSphere Client with the vCenter Server Management user Go to Monitor > VxRail > Last Configuration Data Sent Use the Download option
- B. SSH to the VxRail Manager VM with the mystic user
SU to root
Go to the /opt/VxRail/config directory
SCP the initial-config json file to a local location - C. Log in to vCenter with the vSphere Client with the vCenter Administration user Go to Configure > VxRail > System Use the Product Documentation option
- D. Open an FTP connection to the VxRail Manager VM with the mystic user Go to the /var/lib/vmware-marvin directory GET the config-initial json file
Answer: A
NEW QUESTION 68
What is a benefit of using the VxRail REST API?
- A. Polling for vSAN performance statistics
- B. Automated security audits of VxRail clusters
- C. Programmatically gather VxRail system health
- D. Remote upgrades of iDRAC related software only
Answer: C
NEW QUESTION 69
Match each component of the VxRail HCI System Software to its description.
Answer:
Explanation:
NEW QUESTION 70
An implementation engineer is in the validation phase of a VxRail deployment with two Dell EMC ToR switches. Which command should they run on each of the ToR switches to validate that Link Aggregation has been configured according to Dell best practices for VxRail node interfaces?
- A. show interface
- B. show port-channel summary
- C. show interface status
- D. show network-policy profile
Answer: D
NEW QUESTION 71
Match each IDRAC Maintenance page tab to its description.
Answer:
Explanation:
NEW QUESTION 72
A VxRail cluster is being deployed in a DMZ environment. What is the recommended deployment option?
- A. Internal vCenter Server with internal DNS
- B. External vCenter Server with VxRail-deployed VDS
- C. Internal vCenter Server with external DNS
- D. External vCenter Server with customer-supplied VDS
Answer: D
NEW QUESTION 73
......
Get up-to-date Real Exam Questions for DES-6322: https://actualtests.trainingquiz.com/DES-6322-training-materials.html
