[Jan 01, 2024] Genuine AZ-800 Exam Dumps New 2024 Microsoft Pratice Exam
New 2024 Realistic AZ-800 Dumps Test Engine Exam Questions in here
The reality is that developing skills is a must, and earning a certification from a worldly-renowned vendor is one of the variants. If your aim is to get a position as a Windows Server Hybrid Administrator, then passing the AZ-800 exam is what you need to do first of all. The second exam that you will need to sit for is AZ-801. Still, let’s have a closer look at the AZ-800 test also known as Administering Windows Server Hybrid Core Infrastructure.
To pass the AZ-800 exam, candidates must demonstrate their expertise in implementing and managing Windows Server technologies, including Active Directory, Hyper-V, and Storage Spaces Direct. They must also have a deep understanding of Azure services such as Azure Virtual Machines, Azure Storage, and Azure Site Recovery. Additionally, candidates must be familiar with hybrid scenarios and be able to manage and monitor hybrid environments.
NEW QUESTION # 60
You have an on-premises server named Server1 that runs Windows Server.
You have an Azure virtual network that contains an Azure virtual network gateway.
You need to connect only Server1 to the Azure virtual network.
What should you use?
- A. a Site-to-SiteVPN
- B. Azure Network Adapter
- C. Azure Extended Network
- D. an ExpressRoute circuit
Answer: B
Explanation:
https://docs.microsoft.com/en-us/windows-server/manage/windows-admin-center/azure/use- azure-network-adapter
NEW QUESTION # 61
You have an on-premises server named Server1 that runs Windows Server and has internet connectivity.
You have an Azure subscription.
You need to monitor Server1 by using Azure Monitor.
Which resources should you create in the subscription, and what should you install on Server1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/agents/gateway
https://docs.microsoft.com/en-us/windows-server/manage/windows-admin-center/azure/azure-monitor
NEW QUESTION # 62
You need to meet the technical requirements for VM2.
What should you do?
- A. Implement shielded virtual machines.
- B. Enable enhanced session mode.
- C. Enable the Guest services integration service.
- D. Implement Credential Guard.
Answer: B
Explanation:
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more Information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements, if the case study has an All Information tab. note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Fabrikam, Inc. Is a manufacturing company that has a main office In New York and a branch office in Seattle.
On-premises Servers
The on-premises network contains servers that run Windows Server as shown in the following table.
DC1 hosts all the operation master roles.
WEB1 and WEB2 run an Internet Information Services (IIS) web app named Webapp1.
NEW QUESTION # 63
You need to sync files from an on premises server named Server1 to Azure by using Azure File Sync.
You have a cloud tiering policy that is configured for 30 percent free space and 70 days.
Volume E on Server1 is 500 GB.
A year ago, you configured E:\Data on Server1 to sync by using Azure File Sync. The files that are visible in E:\Data are shown in the following table.
Volume E does NOT contain any other files.
Where are File1 and File3 located? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows-server/manage/windows-admin-center/azure/azure-file-sync
https://docs.microsoft.com/en-us/azure/storage/file-sync/file-sync-cloud-tiering-overview
NEW QUESTION # 64
Your network contains an Active Domain Services (AD DS) forest. The forest contains three domains.
Each domain contains 10 domain controllers.
You plan to store a DNS zone in a custom active Directory partition.
You need to create the Active Directory partition for the zone. The partition replicate to only four of the domain controllers.
What should you use?
- A. Active Directory Sites and Services
- B. Active Directory Administrator Center
- C. DNS Manager
- D. dnscmd.exe
Answer: B
NEW QUESTION # 65
Your network contains an on-premises Active Directory Domain Services (AD DS) domain named contoso.com The domain contains three servers that run Windows Server and have the Hyper-V server rote installed. Each server has a Switch Embedded Teaming (SET) team You need to verity that Remote Direct Memory Access (RDMA) and all the required Windows Server settings are configured properly on each server.
What should you use?
- A. the validate-DCB cmdtet
- B. Server Manager
- C. Failover Cluster Manager
- D. the Get-NetAdaptor cmdlet
Answer: A
Explanation:
Reference:
https://github.com/Microsoft/Validate-DCB
NEW QUESTION # 66
You have an Azure virtual machine named VM1 that runs Windows Server.
You need to configure the management of VM1 to meet the following requirements:
Require administrators to request access to VM1 before establishing a Remote Desktop connection.
Limit access to VM1 from specific source IP addresses.
Limit access to VM1 to a specific management port.
What should you configure?
- A. a network security group (NSG)
- B. Azure Front Door
- C. Azure Active Directory (Azure AD) Privileged Identity Management (PIM)
- D. Microsoft Defender for Cloud
Answer: D
Explanation:
https://docs.microsoft.com/en-us/azure/defender-fo
NEW QUESTION # 67
Drag and Drop Question
You create an Azure virtual machine named Server1 that runs Windows Server.
Server1 has the disk configurations shown in the following exhibit.
You need to create a new 100-GB volume on Server1.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
Step 1: Create and attach a new data disk
Add a data disk.
1. Sign in to the Azure portal.
2. Search for and select Virtual machines.
3. Select a virtual machine from the list.
4. On the Virtual machine pane, select Disks.
5. On the Disks pane, select Create and attach a new disk.
6. In the drop-downs for the new disk, make the selections you want, and name the disk.
7. Select Save to create and attach the new data disk to the VM.
Step 2: Initialize the disk
Initialize a new data disk.
1. Connect to the VM.
2. Select the Windows Start menu inside the running VM and enter diskmgmt.msc in the search box. The Disk Management console opens.
3. Disk Management recognizes that you have a new, uninitialized disk and the Initialize Disk window appears.
4. Verify the new disk is selected and then select OK to initialize it.
5. The new disk appears as unallocated. Right-click anywhere on the disk and select New simple volume. The New Simple Volume Wizard window opens.
6. Etc.
Step 3: Create a new simple volume
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/attach-managed-disk-portal
NEW QUESTION # 68
Your company has a main office and a branch office. The two offices are connected by using a WAN link. Each office contains a firewall that filters WAN traffic.
The network in the branch office contains 10 servers that run Windows Server. All servers are administered from the main office only.
You plan to manage the servers in the branch office by using a Windows Admin Center gateway.
On a server in the branch office, you install the Windows Admin Center gateway by using the defaults settings.
You need to configure the firewall in the branch office to allow the required inbound connection to the Windows Admin Center gateway.
Which inbound TCP port should you allow?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 69
Hotspot Question
You have an on-premises Active Directory Domain Services (AD DS) domain that syncs with an Azure Active Directory (Azure AD) tenant.
You have an on-premises web app named WebApp1 that only supports Kerberos authentication.
You need to ensure that users can access WebApp1 by using their Azure AD account. The solution must minimize administrative effort.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
https://docs.microsoft.com/en-us/azure/active-directory/app-proxy/application-proxy-add-on- premises-application
NEW QUESTION # 70
You have a server named Server1 that has Windows Admin Center installed. The certificate used by Windows Admin Center was obtained from a certification authority (CA).
The certificate expires.
You need to replace the certificate.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - From Internet Information Services (lls)Manager, bind a certificate.
2 - Copy the certificate thumbprint.
3 - Rerun Windows Admin Center Setup and select Change.
Reference:
https://www.starwindsoftware.com/blog/change-the-windows-admin-center-certificate
NEW QUESTION # 71
You have a Windows Server container host named Server1 that has a single disk.
On Server1, you plan to start the containers shown in the following table.
Which isolation mode can you use for each container? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage-containers/hyperv-container
NEW QUESTION # 72
You deploy a new Active Directory Domain Services (AD DS) forest named contoso.com. The domain contains three domain controllers named DC1, DC2, and DC3.
You rename Default-First-Site-Name as Site1.
You plan to ship DC1, DC2, and DC3 to datacenters in different locations.
You need to configure replication between DC1, DC2, and DC3 to meet the following requirements:
Each domain controller must reside in its own Active Directory site.
The replication schedule between each site must be controlled independently.
Interruptions to replication must be minimized.
Which three actions should you perform in sequence in the Active Directory Sites and Services console? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Create two additional sites...
2 - Create a connection object between DC1 and DC2.
3 - Create a connection object between DC2 and DC3.
NEW QUESTION # 73
You need to meet the technical requirements for Server1. Which users can currently perform the required tasks?
- A. Admin1 and Admin3 only
- B. Admin3 only
- C. Admin1 only
- D. Admin1 Admin2. and Admm3
Answer: A
NEW QUESTION # 74
Your network contains an Active Directory Domain Services (AD DS) domain named adatum.com The domain contains a server named Server1 and the users shown In the following table.
Server1 contains a folder named D:\Folder1. The advanced security settings for Folder 1 are configured as shown in the Permissions exhibit. (Click the Permissions lab.)
Folder1 is shared by using the following configurations
Answer:
Explanation:
NEW QUESTION # 75
You have a server named Server1 that runs Windows Server and has the Hyper-V server role installed.
You need 10 limit which Hyper-V module cmdlets helpdesk users can use when administering Server 1 remotely.
You configure Just Enough Administration (JEA) and successfully build the role capabilities and session configuration files.
How should you complete the PowerShell command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/scripting/learn/remoting/jea/register-jea?view=powershell-7.2
NEW QUESTION # 76
You have servers that run Windows Server 2022 as shown in the following table.
Server2 contains a .NET app named App1.
You need to establish a WebSocket connection from App1 to the SQL Server instance on Server!. The solution must meet the following requirements:
* Minimize the number of network ports that must be open on the on-premises network firewall.
* Minimize administrative effort.
What should you create first?
- A. a hybrid connection
- B. an Azure VPN gateway
- C. a WFC relay connection
- D. an Azure Relay namespace
Answer: A
NEW QUESTION # 77
Hotspot Question
Your network contains an Azure Active Directory Domain Services (Azure AD DS) domain named contoso.com.
You need to configure a password policy for the local user accounts on the Azure virtual machines joined to contoso.com.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 78
Your network contains an Active Directory Domain Services (AD DS) forest named contoso.com. The forest contains a child domain named east.contoso.com.
in the contoso.com domain, you create two users named Admin1 and Admin2.
You need to ensure that the users can perform the following tasks:
* Admin1 can create and manage Active Directory sites.
* Admin2 can deploy domain controller to the easl.conloso.com domain.
The solution must use the principle of least privilege.
To which group should you add each user? To answer, select the appropriate options in the answer area.
NOTE Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows-server/remote/remote-access/ras/multisite/configure/step-2-configure-the-multisite-infrastructure
NEW QUESTION # 79
You need to meet the security requirements for passwords.
Where should you configure the components for Azure AD Password Protection? lo answer, drag the appropriate components to the correct locations. Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/concept-password-ban-bad-on-premises
NEW QUESTION # 80
......
Grab latest Amazon AZ-800 Dumps as PDF Updated: https://actualtests.trainingquiz.com/AZ-800-training-materials.html
