Prepare Top Cisco 010-151 Exam Study Guide Practice Questions Edition
Go to 010-151 Questions - Try 010-151 dumps pdf
NEW QUESTION # 11
Refer to the exhibit.
Which option should you select to get the output of the show tech-support detail command for the Cisco UCS B-Series blade?
- A. B - chassis
- B. D - rack-server
- C. C - fabric-extender
- D. A - ucsm
Answer: A
NEW QUESTION # 12
Which supervisor module is supported by a Cisco Nexus 7700 Series Switch?
- A. third-generation supervisor enhanced module (Sup3E)
- B. first-generation supervisor module
- C. second-generation supervisor module (Sup2)
- D. second-generation supervisor enhanced module (Sup2E)
Answer: D
NEW QUESTION # 13
A company wants to build a data center infrastructure which can provide up to 99.982% uptime availability per year. Which ANSI/TIA-942 data center tier meets the requirement?
- A. Concurrently maintainable site infrastructure
- B. Redundant-capacity component site infrastructure
- C. Basic site infrastructure
- D. Redundant-distribution site infrastructure
Answer: A
NEW QUESTION # 14
Which RAID level fault tolerance allows two disk failures?
- A. RAID 1
- B. RAID 4
- C. RAID 6
- D. RAID 5
Answer: C
NEW QUESTION # 15
Which Cisco Nexus 5000 Series model supports 1/10G BASE-T ports?
- A. Cisco Nexus 5596T
- B. Cisco Nexus 5548UP
- C. Cisco Nexus 5596UP
- D. Cisco Nexus 5548P
Answer: A
NEW QUESTION # 16
Up to what speed can Category 5 UTP cable transmit data?
- A. 100 Mb/s
- B. 10000 Mb/s
- C. 1000 Mb/s
- D. 10 Mb/s
Answer: C
NEW QUESTION # 17
Which statement about RAID is true?
- A. RAID stores data in the array with data striping, encryption, and parity to organize the data among the disks.
- B. RAID drive group appears to the host computer as multiple physical storage units.
- C. RAID is a scheme used to logically combine several independent disks to form an array or group of drives.
- D. RAID parity information can be stored across multiple RAID levels.
- E. RAID provides data redundancy with either odd parity or even parity.
Answer: C
NEW QUESTION # 18
Refer to the exhibit.
Where is the best place to see whether the system is ready for a Fabric Interconnect failover?
- A. E - High Availability Details
- B. C - Part Details
- C. D - Access
- D. A - Overall Status operable
- E. B - L1 Connection
Answer: A
NEW QUESTION # 19
Refer to the exhibit.
Which item does A represent?
- A. mLOM for Cisco UCS B420 M3 Blade Servers
- B. Virtual Interface Card for Cisco UCS B420 M3 Blade Servers
- C. Virtual Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
- D. SuperCap module for Cisco UCS B420 M3 Blade Servers
- E. Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
Answer: A
NEW QUESTION # 20
Refer to the exhibit.
Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?
- A. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.
- B. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.
- C. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.
- D. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.
Answer: B
NEW QUESTION # 21
What is the command to provide details pertaining to the state of the cluster?
- A. Show cluster extended-state
- B. Show extended cluster state
- C. Show cluster state
- D. Show cluster
Answer: A
NEW QUESTION # 22
How do you find the serial number of a Cisco UCS 5108 Blade Server chassis?
- A. Use the Cisco UCS Application.
- B. Use the Cisco UCS Admin.
- C. Use the Cisco UCS Manager.
- D. Use the Cisco UCS Assistant.
Answer: C
NEW QUESTION # 23
Refer to the exhibit.
Where is the best place to see the power supply status of the blade server enclosure?
- A. C - Chassis1 - Servers
- B. E - Fabric Interconnects A - PSUs
- C. D - Rack-Mounts - Servers
- D. A - Chassis 1
- E. B - Chassis 1 - PSUs
Answer: E
Explanation:
Explanation
NEW QUESTION # 24
Refer to the exhibit.
Which item does C represent?
- A. Favorite Icon (make any specific work pane in the application as your favorite)
- B. Pin icon (prevents Navigation pane from sliding)
- C. Icon to view the Navigation pane
- D. Index Icon (view listing in alphabetical order)
Answer: A
NEW QUESTION # 25
Refer to the exhibit.
Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?
- A. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.
- B. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.
- C. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.
- D. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LE
Answer: B
NEW QUESTION # 26
Refer to the exhibit.
Which option should you select to get the output of the show tech-support detail command for the Cisco UCS B-Series blade?
- A. B - chassis
- B. D - rack-server
- C. C - fabric-extender
- D. A - ucsm
Answer: A
NEW QUESTION # 27
Refer to the exhibit.
Which item does F represent?
- A. CMOS Battery
- B. HDD 1
- C. SuperCap Module
- D. TFP Module
- E. CPU 2
Answer: E
NEW QUESTION # 28
What are two common steps to troubleshooting a rack server with unrecognized or memory errors? (Choose two.)
- A. Reseat DIMMs
- B. Ensure DIMMs are installed in correct slots
- C. Check that the AC power cord is OK
- D. Check the front I/O cable connection to the motherboard
- E. Check CPU sockets for bent pins
Answer: A,B
NEW QUESTION # 29
Which Cisco MDS model supports the most Fibre Channel ports per chassis?
- A. MDS 9506
- B. MDS 9513
- C. MDS 9250i
- D. MDS 9509
Answer: B
NEW QUESTION # 30
Refer to the exhibit.
Where is the best place to find the B200 BIOS version used in a specific Cisco UCS Manager version?
- A. C - Images
- B. E - Management Extension
- C. B - Packages
- D. A - Installed Firmware
- E. D - Capability Catalog
Answer: C
NEW QUESTION # 31
Which processor option is supported in the Cisco UCS C420 M3 Server?
- A. two or four Intel Xeon E7-8800 series multicore processors
- B. up to two Intel Xeon E5-4600 series multicore processors
- C. up to two Intel Xeon E7-4800 series multicore processors
- D. up to four Intel Xeon E5-4600 series multicore processors
Answer: D
NEW QUESTION # 32
Which two commands display the version of Cisco NX-OS code that the device is currently running on? (Choose two.)
- A. show interface
- B. show module
- C. show version
- D. show license
- E. show boot
Answer: B,C
NEW QUESTION # 33
Which command can be used to exit to EXEC mode from this current mode?
switch(config-if) #
- A. end
- B. Ctrl-L
- C. quit
- D. Ctrl-C
- E. exit
Answer: A
NEW QUESTION # 34
......
Cisco 010-151 exam covers a wide range of topics related to supporting Cisco data center networking devices. These topics include an understanding of basic data center networking concepts, such as the OSI model and Ethernet technologies. 010-151 exam also covers more advanced topics such as network virtualization, Cisco Application Centric Infrastructure (ACI), and network automation. 010-151 exam is designed to test the candidate’s ability to configure, troubleshoot, and maintain Cisco data center networking devices.
Free CCT Data Center 010-151 Exam Question: https://actualtests.trainingquiz.com/010-151-training-materials.html
